ND75 Quick Start GuideUpdated 7 months ago
ND75 Quick Start Guide
1. Why cannot type after plugging in the cable?
Please press “Fn key’’ and “T key’’ after plugging in the USB cable. If that does not help, see notes below.
Why doesn’t the screen work when the cable isn’t plugged in?/ why the wireless connection is not working?
Please remove the shift keycap and turn on the battery switch. Since it is default turned off to avoid the power consumption during transportation.
How to switch to connection mode?
Bluetooth Connection: Hold “Fn Key’’ and “Q Key’’ for 3 seconds connect with Bluetooth,
Dongle connection: Hold “Fn Key’’ and “R Key’’ for 3 seconds and plug in receiver.
Please press “Fn Key’’ and “T Key’’ when you switch to wired connection.
How to switch screen language?
Press “ Fn Key” and “ + ＝Key” or “ Fn Key” and “- key“ to switch the interface and find the small blue icon, Press “Fn Key” and “Enter Key” to choose English.
How to install ND75 Driver?
[Install]https://drive.google.com/file/d/1aW6C33YhagexZKzrFWSEtqajFx_16EZa/view?usp=drive_link
Before you install, please select the language you using.
How to synchronize screen time?
Open the ND75 Driver Software, click the screen icon enter the TET Screen interface and then find the time sync button below.
How to upload GIF?
Enter the TFT Screen interface and click the Import button to import your own GIF, then click the Upload to keyboard button.
Notice: The maximum number of frames that can be uploaded is 141 frames.
How to change RGB effect or color?
Press “ Fn Key” and “ + ＝Key” or “ Fn Key” and “- key“ to switch the interface and find the small Colour and Effect icon, Press “Fn Key” and “Enter Key” to choose RGB effect or Color.
How to adjust volume?
- Press Fn Key and F10 Key to silent mode.
- Press Fn Key and F11 Key to turn down the volume.
- Pree Fn Key and F12 Key to turn up the volume.
How to turn on/ off screen?
Press Fn Key and Delete Key.
11. Can the screen be replaced with a Badge?
Nope
Notes: If your ND75 still isn't turning on try flashing the screen firmware. Unplug the USB and turn off the power . Re-insert the USB. After finishing display the "no not" logo on the small screen, press FN+T and it will connect to wired mode. The driver “Start” will light up, then just flash the firmware directly. Click here to download firmware: https://drive.google.com/file/d/1QeQvsKv2lqKl-0T-2OSG01hvOuMMREgl/view?usp=sharing
If the driver" Start" does not light up, please try above operation more times.